Grade 6 Physical And Health Education – SLings And Splints Quiz

1. What is the purpose of using a splint?

To control bleeding
To reduce swelling
To increase flexibility
To prevent further injury
Explanation:

Using a splint helps to stabilize the injured area and prevent further damage while waiting for medical attention.

2. Which of the following is a common type of splint used for sport related injuries?

Rubbing alcohol
Ace bandage
Ice pack
Heat pad
Explanation:

An Ace bandage is commonly used as a makeshift splint to provide support and stabilization to a injured limb.

3. What should you do before applying a splint to a suspected fracture?

Apply heat to the area
Check for circulation below the injury site
Massage the area
Move the limb as much as possible
Explanation:

It is important to check for circulation to ensure proper blood flow before splinting a suspected fracture.

4. What is the correct way to immobilize a suspected broken arm using a splint?

Cover exposed skin with the splint
Keep the arm bent at the elbow
Keep the arm straight and supported
Use a loose splint
Explanation:

Immobilizing a broken arm in a straight position helps prevent further injury and allows for proper healing.

5. When should a splint be removed from an injured limb?

After the swelling has decreased
After 24 hours
Only by a medical professional
Immediately after the injury occurs
Explanation:

A splint should only be removed by a medical professional to ensure that the injury has healed properly and to prevent further damage.

6. What is the primary purpose of a sling?

To stabilize the injury
To provide warmth
To reduce inflammation
To apply pressure to the wound
Explanation:

A sling is used to support and immobilize an injured arm or shoulder, allowing it to rest and heal properly.

7. What should you do if you suspect a shoulder dislocation?

Massage the area
Put pressure on the shoulder
Immobilize the arm in a sling
Apply heat to the area
Explanation:

Immobilizing the arm in a sling helps prevent further movement of the shoulder joint, reducing the risk of additional damage.

8. How should you position the arm in a sling for a shoulder injury?

Hanging loosely by the side
Tightly wrapped around the neck
Straight and supported at the wrist
Bent at a 90-degree angle
Explanation:

Positioning the arm in a sling at a 90-degree angle helps to reduce strain on the injured shoulder and promote healing.

9. What is an important consideration when using a sling for an arm injury?

Wear the sling on the opposite arm
Keep the arm elevated above the heart
Tighten the sling to restrict movement
Remove the sling for sleeping
Explanation:

Keeping the injured arm elevated above the heart helps to reduce swelling and promote circulation, aiding in the healing process.

10. What material is commonly used to make slings?

Metal
Rubber
Cotton
Plastic
Explanation:

Cotton is a soft and breathable material that is commonly used to make slings for comfort and support.

11. What is the purpose of a sling for a shoulder injury?

To hide the injury
To increase blood flow to the injured area
To keep the arm immobilized and supported
To promote movement of the injured shoulder
Explanation:

The purpose of a sling for a shoulder injury is to keep the arm immobilized and supported to allow for healing.

12. Which body part is typically immobilized with the help of a splint?

Arm
Leg
Back
Neck
Explanation:

A splint is typically used to immobilize and support an injured arm to prevent further damage.

13. Why is it important to seek medical attention before applying a splint?

To prevent anyone from using their arm
To delay the healing process
To assess the severity of the injury
To make the injury look more serious
Explanation:

Seeking medical attention before applying a splint is important to assess the severity of the injury and ensure the proper treatment.

14. What should you do if someone has a suspected broken bone before applying a splint?

Give them a massage
Elevate and support the injured limb
Ignore the injury
Help them move the injured limb around
Explanation:

Before applying a splint to a suspected broken bone, it is important to elevate and support the injured limb to reduce swelling and prevent further damage.

15. How long should a splint be left on for an injured limb?

Only for a few minutes
Until medical help arrives
Until medical advice is sought
Until the injured person can't feel their limb
Explanation:

A splint should be left on an injured limb until medical help arrives to ensure proper assessment and treatment of the injury.

16. Which of the following activities should be avoided with a splint on the arm?

Swimming in a pool
Lifting heavy weights
Drawing or writing
Playing football
Explanation:

Activities such as lifting heavy weights should be avoided when wearing a splint on the arm to prevent further injury or damage.

17. What function does a sling serve?

To provide support and immobilization
To jump higher in sports
To show off to friends
To run faster
Explanation:

A sling is used to provide support and immobilization to an injured arm or shoulder for proper healing.

18. What should be done immediately after a splint is applied for an arm injury?

Apply ice directly to the injury
Remove the splint
Seek medical help
Start using the arm normally
Explanation:

After a splint is applied for an arm injury, it is important to seek medical help for further assessment and treatment of the injury.

19. How can a person with a splint maintain the hygiene of the affected limb?

Avoid washing altogether
Apply lotion or perfume on the splint
Keep the splint in water at all times
Clean around the splint with a damp cloth
Explanation:

To maintain hygiene with a splint, it is important to clean around the splint with a damp cloth while avoiding getting the splint wet.

20. What should you do if the skin under the splint becomes red, swollen, or numb?

Ignore it as a normal part of the healing process
Keep the splint on tighter
Rub the skin with a rough cloth
Loosen the splint
Explanation:

If the skin under the splint shows signs of redness, swelling, or numbness, it is important to loosen the splint to prevent further complications.

21. Why is it important to support an injured limb with a sling or splint?

To keep the limb stable and secure
To prevent others from touching the injury
To allow for free movement
To show off to friends
Explanation:

Supporting an injured limb with a sling or splint is important to keep the limb stable and secure, allowing for proper healing.

22. What is the primary benefit of using a splint for an arm injury?

To enhance flexibility
To prevent further injury
To speed up the recovery process
To take up less space in the backpack
Explanation:

The primary benefit of using a splint for an arm injury is to immobilize and support the injured limb, preventing further injury or damage.

23. When should a splint be removed from an injured arm?

Once the injured person feels like it
Only after consulting a healthcare professional
When the injured limb feels completely fine
After a few minutes for comfort
Explanation:

A splint should only be removed from an injured arm after consulting a healthcare professional to ensure that it is safe to do so and that the injury has healed properly.

24. How should a person with a splint carry out daily activities?

Avoid using the injured limb as much as possible
Ask others to help with everything
Modify activities to work around the injury
Try to do everything normally
Explanation:

A person with a splint should modify their daily activities to work around the injury, avoiding using the injured limb as much as possible to prevent further damage.

25. Why is it important to immobilize an injured limb with a splint?

To promote blood circulation
To test how severe the injury is
To reduce swelling and pain
To encourage movement
Explanation:

It is important to immobilize an injured limb with a splint to reduce swelling and pain, allowing for proper healing of the injury.

26. Which of the following scenarios would require the use of a splint?

A headache
A stomach ache
A broken wrist
A sore throat
Explanation:

A broken wrist would require the use of a splint to immobilize and support the injured limb while it heals.

27. What materials can be used to make a splint?

Paper and cotton balls
Cardboard and bandages
Wood and metal
Concrete and steel
Explanation:

Splints can be made from materials like cardboard and bandages to immobilize and support an injured limb until medical help is received.

28. How should a splint be secured in place on an injured arm?

With tightly wrapped bandages
With loose knots
Only at the fingertips
With duct tape
Explanation:

A splint should be secured in place on an injured arm with tightly wrapped bandages to ensure stability and support for the limb.

29. What should be done if the injured person feels numbness or tingling in the limb with the splint?

Tighten the splint even more
Leave the splint in place
Remove the splint immediately
Ignore the tingling sensation
Explanation:

If the injured person feels numbness or tingling in the limb with the splint, it is important to remove the splint immediately to prevent further complications or damage.

30. How can a sling be adjusted to provide the best support for an injured shoulder?

Ensure the shoulder is held securely but comfortably
Make it as loose as possible
Keep it tight around the neck
Wrap it around the waist
Explanation:

A sling should be adjusted to ensure that the injured shoulder is held securely but comfortably to provide the best support and immobilization for healing.

31. What is the first step to take when assisting someone with a painful arm injury?

Apply heat to the injured area
Ask them to move the arm as much as possible
Laugh at them
Place the arm in a sling or splint
Explanation:

The first step to take when assisting someone with a painful arm injury is to place the arm in a sling or splint to immobilize and support the limb.

32. How should a person with a splint be transported to seek medical help?

By forcing them to walk
By letting them drive themselves
By providing a stretcher
By carrying them with the injured limb dangling
Explanation:

A person with a splint should be transported to seek medical help by providing a stretcher to ensure that the injured limb is supported and immobile during transport.

33. What place should a splint typically be applied in the case of an arm fracture?

Above and below the injured area
Over the clothes
Around the waist
On the fingertips
Explanation:

In the case of an arm fracture, a splint should be applied above and below the injured area to immobilize and support the limb effectively.

34. Why should a splint be padded before applying it to an injured limb?

To make it heavier
To keep the limb warm
To protect the skin from pressure sores
To make it more colorful
Explanation:

Padding a splint before applying it to an injured limb is important to protect the skin from pressure sores that can develop due to constant pressure.

35. What is the advantage of using a sling or splint for a sports-related injury?

To immobilize and support the injured limb
To win sympathy from others
To catch the attention of the coach
To show off during games
Explanation:

Using a sling or splint for a sports-related injury helps to immobilize and support the injured limb, allowing for proper healing and preventing further damage.